Cromaloy 1

Cromaloy 1 is austenitic in character providing good resistance to corrosion up to 1100°C whilst retaining the benefit of ductility when compared with the ferritic Iron/Chrome/Aluminium resistance alloys.

The use of iron in the alloy reduces the density and produces an economical product for use in medium temperature applications. Cromaloy 1 is available in sizes down to 0.08 mm.

Physical and Mechanical Properties

Units
Maximum continuous operating temperature in air°C1150
Nominal composition%Ni 60
Cr 16
Fe Bal
Density at 20°Cg/cm³8.2
Resistivity at 20°CµΩcm111
Thermal conductivity at 20°CW/mK13.4
Specific heat capacity at 20°CkJ/kgK0.46
Melting point (approx.)°C1390
Tensile strength Rm, 0.5 mm wire – annealedN/mm²610
Elongation at break, 0.5 mm wire - annealed%> 25

Temperature Dependant Factors

Reference temperature 20°C

Temp °C20040060080010001200
Temp °F3927521112147218322192
Resistivity Factor1.0271.0621.071.081.0891.115
Coeff. of thermal expansion (10^6 /K)1416.515.51617

The figures given in these tables represent nominal or typical values.

Information contained within this technical data sheet is based upon the general experience of Scott Precision Wire Ltd and is believed to be correct at the time of issue.

No warranty is given or is to be implied from the details above.

Customers are advised to carry out independent tests in order to determine the suitability of any Scott Precision Wire Ltd product for an application.